|
Power Giant W200 Serial
Numbers, and Production Figures |
|
I included both the W200(4wd) and the D200(2wd) serial numbers to help
show what the serial numbers should be. |
|
1957 3/4 Ton Production Numbers (The first year for PG W200s) |
|
W200s (4wd) |
D200s(2wd) |
105 Flat Six W200s |
2,863 Flat Six D200s |
202 V8(315) W200s |
2,950 V8(315) D200s |
|
|
1957 3/4 Ton Serial Numbers
|
|
|
Model Code |
Starting Serial Numbers |
K6-D200 |
83414001 |
K6-W200 |
82701001
|
K8-D200 |
84662001 |
K8-W200 |
83250001 |
|
1957 3/4 Ton Model Code Key |
K |
1957 |
6 |
Flat Head six engine |
8 |
V8 engine |
D |
Two Wheel Drive |
W |
Four Wheel Drive |
|
|
This is the paper tag that was put in the glovebox of all 1957
Dodge trucks, and early 1958 Dodge trucks. I have only ever seen
this one.
This was the only tag put on 1957 Dodge trucks, so most 1957 trucks
can only be verified by the VIN number on the frame. The VIN number
is located on the drivers side of the frame near the front spring
shackle.
|
|
|
|
1958 3/4 Ton Production Numbers
|
|
W200s (4wd) |
D200s(2wd) |
396 Flat Six W200s |
1,899 Flat Six D200s |
331 V8(315) W200s |
1,508 V8(315) D200s |
|
|
1958 3/4 Ton Serial Numbers |
|
Model Code |
Starting Serial Numbers |
L6-D200 |
L6D2-L01001 |
L6-W200 |
L6W2-L01001 |
L8-D200 |
L8D2-L01001 |
L8-W200 |
L8W2-L01001 |
|
1958 3/4 Ton Serial Number Key |
L |
1958 |
6 |
Flat Head six engine |
8 |
V8 engine |
D |
Two Wheel Drive |
W |
Four Wheel Drive |
2 |
3/4 Ton |
L |
Light Duty |
|
|
|
BUILT
BY CHRYSLER CORPORATION DETROIT MICHIGAN U.S.A. |
|
MAXIMUM
GROSS VEHICLE WEIGHT BELOW IS RESTRICTED BY SPRINGS |
|
AND
AUX. EQUIP. WARRANTY VOID IF GROSS WEIGHT IS EXCEEDED |
|
SERIAL
NO. |
|
MAX
G.V.W. LBS |
|
|
REAR
AXLE CAP. |
|
REAR
AXLE |
|
MAKE |
|
MODEL |
|
|
FRONT
AXLE CAP. |
|
TRANS. |
|
MAKE |
|
MODEL |
|
|
CERT.
NET HP AT R.P.M. |
|
FRONT
SPRING CAP. |
|
REAR
SPRING CAP. |
|
|
MAKE
AUX. |
|
MODEL
TRANS. |
|
S. O. NO
|
|
|
|
|
|
1958 is the first year for the VIN tag to be located on the drivers door
jamb like the rest of the years of Power Giant trucks. Though some early
1958 trucks have the paper tags like the 1957 trucks.
The early trucks often have no holes in the door jamb for the tag, and
have single headlights. Later 58's, and every year following of PG has
the VIN tag on the drivers door jamb.
|
It is unclear what the starting Frame number is, so I just
threw in numbers that were higher than what I knew to be an actual Frame
number. |
1960 3/4 Ton Parts Availability Number Key |
0 |
1960 (in the Model code, P is also
1960) |
6 |
Flat Head six engine |
8 |
V8 engine |
D |
Two Wheel Drive |
W |
Four Wheel Drive |
2 |
3/4 Ton |
L |
Light Duty |
|
|
1960 3/4 Ton Frame/VIN Number Key |
2 |
Four Wheel Drive |
1 |
Two Wheel Drive |
2 |
3/4 Ton |
8 |
V8 engine |
6 |
Flat Head six engine |
0119594 |
Sequential build number |
|
|
|
BUILT
BY CHRYSLER CORPORATION DETROIT MICHIGAN USA |
|
MAXIMUM
GROSS VEHICLE WEIGHT BELOW IS RESTRICTED BY SPRINGS |
|
AND
AUX. EQUIP. WARRANTY VOID IF GROSS WEIGHT IS EXCEEDED |
|
REAR
AXLE CAP. |
|
REAR
AXLE |
|
MAKE |
|
MODEL |
|
|
FRONT
AXLE CAP. |
|
TRANS. |
|
MAKE |
|
MODEL |
|
|
CERT.
NET HP AT R.P.M. |
|
FRONT
SPRING CAP. |
|
REAR
SPRING CAP. |
|
|
MAX
G.V.W. LBS |
|
AUX.
TRANS. |
|
S. O. NO
|
|
|
|
|